1990 Honda RC30

Description

Click here for an CycleVIN Motorcycle History Report on this 1990 Honda RC30. Additional photos are available here for your perusal.

When the new World Superbike Championship was introduced in 1988, Honda had an issue as its highly successful custom-built RVF750 factory endurance racer (not the RC45) wouldn’t be eligible to compete. So they set out to create a new top-shelf, street-legal, limited edition race bike, producing the minimum number of units required to satisfy homologation rules. Knowing it would only have to turn out a relatively small batch of machines, Soichiro Honda wanted to use the new model to demonstrate what its factory race department was capable of. The result was a no-expense-spared race-grade legend brimming with features previously reserved for track-only machinery. Japan called it the VFR750R, but the bike we fell in love with in America was named the RC30.

At the heart of the RC30 was a liquid-cooled, 748cc, 90-degree V4 engine with four valves per cylinder, gear-driven double-overhead cams, titanium connecting rods, forged two-ring pistons, an 11.0:1 compression ratio, and a “big bang” firing order. Paired with a six-speed transmission with a trick slipper clutch, the sophisticated V4 made 118 hp at 11,000 rpm and 55 ft-lbs of torque at 9,800rpm (unrestricted). The VFR750R had a best-in-class dry weight of 396 lbs and a wet weight of 488 lbs, which was almost 10 lbs less than the game-changing Suzuki GSX-R750. The VFR had a top speed of over 150mph, and thanks to an incredibly high gear ratio, could break 80 mph in first gear.

The RC30 got fully-adjustable Showa suspension fore and aft — 43mm telescopic forks up front and a mono-shock out back. Braking duties went to a pair of fully floating 310mm discs bit by four-piston Nissin calipers in the front and a single 220m unit pinched by a dual-pot caliper in the rear. The bike’s fork sliders also allowed the front calipers to remain in place during wheel changes, a feature that, like the ELF-designed single-sided swing-arm, was born out of competition for ultra-quick pit stops.

In total, only 316 RC30s were sold in the US – and only in the 1990 model year.

It feels like we’ve got a Honda RC30 up for sale every week, and we’re honored that owners of these machines come to us to find new owners. This bike is a little bit different from the rest, as it was involved in an accident and brought back to life.

Manufactured in January of 1990, this RC30 (VIN: JH2RC300XLM200162) is a 49-state US model offered with a clean Colorado title, though it was involved in an accident and got a brand new frame from Honda. A weld on the frame cracked and the head stock came off.

The VIN was stamped by a third party after it was replaced.

The odometer shows 7,349 miles.

It had been sitting stationary and drained on display in a collection for a long time, but seller had us go through it to make it a runner:

We note that this bike is currently equipped with a Sprocket Specialists rear sprocket and aftermarket front brake rotors – our White Glove service can source OEM replacements if the next owner desires.

There is a scratch in the seat underneath the key lock.

A rubber piece on the inside of the right fairing is missing. The two holes normally used for to mount said rubber piece have been filled in with epoxy.

Have any RC30 stories or questions about this listing? Let us know in the comments!