Approaching the museum, which is the big building on the right.

The title of the museum tells you that there’s not just motorcycles here, but 2-wheelers comprise at least 90% of the contents in this small but tightly-packed building. It reminded me of the National Motorcycle Museum in the UK in that all the bikes are so close together that it’s tough to appreciate all the angles of the machinery.

The lobby is where you can buy tickets for €3 a pop, or buy some toys for about the same price.

These three photos comprise the majority of what’s in store:

Let’s look at some individual beauties, starting with a Mini Marcelino. It was originally developed in Italy but they were built under license in Spain between 1969 and 1972.

The Spanish version utilized 1.8 horsepower, 48cc Ducati motors built by Mototrans.

Mototrans was the shortened name of “Maquinaria Y Elementos de Transporte SA”, a Barcelona-based company that merged with Clipper, Spain’s Ducati importer. They ended up building several motorcycles under license from Ducati. This museum had many examples, and most were easily identified by the “FABRICADA BAJO LICENCIA POR MOTOTRANS” under the Ducati logo. This is the “250 24 Horas”, a Spanish evolution of the Mach 1.

The other decal on the tank refers to Ducati’s success at Spain’s famous 24 Hours of Montjuich race.

Mototrans was eventually bought by Yamaha in 1983. They weren’t the only company in the Iberian Peninsula licensing Ducati’s products. Ducati’s first motorcycle was the Cucciolo, though it was actually a bolt-on motor designed to be attached to motorcycles. According to Ducati Trader, “it was the first new automotive design to appear in postwar Europe“, and it became very popular very quickly.

The Portuguese firm Vilar built a variety of bicycles and mopeds using motors from different manufacturers. This was their take on the Cucciolo, which translates to “little puppy”.
This is the Mosquito Bicimotor ISA M70 – but that number doesn’t refer to the displacement.
The motor is a 49cc 2-stroke that was licensed from Italian company Garelli.

I don’t want to make it seem that everything in 40s/50s Spain was licensed. Here’s a bike that was built entirely in Spain, the Echasa Model B. Echasa started as a manufacturer of pistols and shotguns but after the war they got into the two-wheel game with bicycles, then bicycles with motors. In 1954 they designed a complete motorcycle that was simply named “Model A”. In ’56 it evolved into the creatively-named “Model B” and got some upgrades like a telescopic fork.

The drivetrain was of Echasa’s own design, a 2-stroke 65cc single with a 3 speed transmission. Unfortunately, production stopped in 1962 after a fire in the factory.

Part of the reason that many Spanish bike designs were licensed is simply because the local products weren’t very good. Per a display in the museum: “At the beginning of the 50s a great variety of new brands appeared in Spain but most of them were not very successful. The models produced were not very reliable, their features were quite modest and they had a conventional design.” One of the less-conventional creations was this three-wheeler from Derlan called the Gavilan 125. Well, that’s not entirely true – the somewhat goofy looking original is up top in blue. The yellow work trike is a Gavilan that’s been modified as a delivery vehicle:

DEMM was an Italian manufacturer based out of Milan. In 1956 they created a moped called the Dick-Dick, and that spawned an entire family of 49cc Dick-Dicks (there’s a phrase I never thought I’d ever type) that included both mopeds and small motorcycles.

One of the coolest is the Supersport, which had a 49cc 2-stroke single paired with a three-speed transmission.
The tank is very reminiscent of Ducati’s jelly bean design – the museum’s info plaque that corresponds to this bike politely just says “We do not know who copied whom.”

I found this little bike quite fascinating. It’s a Soriano Pantera from 1951. Soriano was named after its founder, Soriano Schotz, the Marquis of Ivanrey. His motorcycle company ran from 1942-1952 in Madrid. All of its creations were small city runabouts.

The Pantera was the last model Soriano built, and it was the only one with telescoping front forks. The drivetrain was a 108cc 2-stroke single with a 3-speed transmission.

Did you know that the name Derbi comes “Derivado de Bicicleta” (Derivatives of Bicycles)? One of the few Spanish brands that’s still alive and kicking (though it was bought by Piaggio in 2001), Derbi has a long history of impressive small motorcycles. One of their prettiest models from the past was the 74 Gran Sport Linea 70 – this purple was one of the many vibrant colors they offered.

It was designed for the 16 year old market and it was so popular that Derbi produced it for an entire decade without any mechanical changes.

Ducson was a Barelona-based manufacturer that built mopeds and small motorcycles using their own 49cc and 65cc two-stroke motors. This is the S12 Special, which featured the 49cc motor and a four-speed transmission.

The motor was good for 4.5 horsepower, enough for a top speed of approximately 55 miles per hour.

Villof started as a DKW automobile repair shop, which may explain why its logo looks similar to the four rings of the Auto Union (which eventually became Audi). Villof was based in Valencia and they existed from 1949-1964. Named after the founder, Vicente Llorens Ferrer, this firm was apparently one of the few manufacturers that made their own carbs as well.

This is the DF 125, which used a 121cc motor designed in-house. Interestingly, the transmission was just 1 speed, and there was no neutral.

Elig did better than the average Spanish manufacturer, with a production run that lasted from 1953 to 1966. This is from their initial model, a 125 (121cc) two-stroke.

This example was built in 1954. It was available with 17 inch or 19 inch wheels.
In addition to wheel size, customers could choose between the 125 or 200 motors and a standard or luxury version of each model.
The 121cc motor was sourced from Hispano Villiers, a Barcelona-based company that licensed Villiers motors. This was the 10M motor.

Setter also lasted from 1953 to 1966. Their most popular motor was a 60cc unit used in several different models.

This is a 1960 model simply called the 49, in reference to its displacement.

Taber was a short-lived (1952-1955) Barcelona-based firm that, as the museum says, “was not very successful“.

This is the B-54, a 125cc two-stroke single paired with a four-speed transmission.
I particularly enjoyed the design of the tank.

In the early 80s, Montesa was suffering. One of the few ways they prolonged their inevitable sale to Honda in 1982 was by winning some Spanish government contracts. This started as an Enduro HL7 before it was modified for military use.

The 349cc 2-stroke single was partnered with a 6-speed transmission…and a rifle.

Rieju was founded in 1934 as a bicycle accessory company – the name came from combining the founders names (Luis Riera Carré and Jaime Juanola Farres). They released their first motorcycle (bicycle with a clipon motor) in 1945, and their first true motorcycle in 1953. This example is from 1955, and it’s from the second series of production.

While you may not have heard of them before, Rieju is still alive and presumably well!
The 170cc four-stroke single was built under license from AMC of France.

Kapi was founded by Federico Saldaña Ramos, an infantry captain in the Spanish Army. Their slogan was “More quality for less money”, and they produced a lineup of small cars as well as three nearly identical bikes, all on a 125cc platform. There was a “sport luxury” model, “sport” model, and “utility” model.

This is the “Tipo Utilitaria”.

Interestingly, the name “Kapi” comes from “Capitan”, Spanish for “Captain”. They apparently used a K instead of a C because it sounded more international.

As shown with the Elig above, this bike also uses a Hispano Villers 125cc 2-stroke motor.

In 1948, Moto Guzzi established a Spanish subsidiary through an Italian named Oscar Ravá that owned a Lancia dealership in Barcelona. Ravá had his motors built by an aviation company and his frames by a bicycle manufacturer. In 1979, “Moto Guzzi Hispania” split up from Guzzi and evolved into their own company, Motorhispania. It still exists as a manufacturer of what looks to be uninspiring small displacement motorcycles and scooters.

There’s a few beauties, like the Motoleggera 65 in the foreground.

This depressingly ugly scoot is the 110, an evolution of the Ziglo 98.

They can’t all be winners, I guess.

There are also several French bikes in the museum that are barely-known in the US, such as this Ravat BS4 with a 175cc two-stroke single motor.

This example is from 1922.

Obviously, there’s plenty of well-known Spanish classics like the Bultaco Metralla Mk2 Kit America below, but in this post I wanted to focus on some bikes you may have never heard of. If you want to see more goodies from Bultaco, OSSA, and your other Spanish favorites, click here to check out the rest of the album!

The base MkII was an impressive bike straight from the dealership floor, but the “Kit America” was a factory race kit that included fancy bodywork, rearsets, and multiple modifications to the drivetrain to bump horsepower from 27 to the mid 30s.

Thus concludes our little tour of this wonderful museum. We look forward to sharing more Iconic Collections with you!

Notify of
Inline Feedbacks
View all comments
Iconic Motorbike Auctions